Programmable
Time-Switch
Programmable Time-Switch is a system for time
dependent switching of electrical loads. It can be used for
automatic switching of electrical loads at programmed times
set by user. It is a very useful equipment for energy saving.
The switching times are controlled by a real time clock independent
of mains power.
|
The system is used for recording
Aplus make reprogrammable serial sound chips through WINDOWS
based software. The software is used for selection of sound
file in wave formt and direct recording into the chip sequentially.
|
Interactive
Voice Solution- MagicVoice
It is a configurable play/record module for
Aplus make sound chips. Serial/parallel interface modes can
be programmed. 128 audio segments can be recorded from PC.
128 audio messages can be configured with multiple combinations
of 128 audio segments. Multiple Language can be selected.
It can be used in Kiosk Mode where initial message, loop message
facility is available in dual languages.
|
PC Based Network
Data Acquisition
The system has been developed,
for efficient and integrated accumulation of process parameters
(like temperature, pressure, level, flow, speed, humidity
count etc.) in a distributed manufacturing plant. In this
system, required process parameters are converted into digital
signal locally through multiple nodes. These nodes are networked
with the PC running monitor software.
|
|
The microcontroller based
intelligent Hooter/Siren controller system has been developed
for fire alarm panels. It incorporates all inductry standard
features for such system with very accurate timings.
|
Sequential
Timer, Programmable thr'u PC
Sequential timer is a very essential equipment
in industry and development labs. Considering the need of
a precision, easily configurable, multi-mode timer, we have
developed it. It is programmable through a very user-friendly
software running in PC. Once programmed, it can run independently
after storing all configuration in non-volatile memory.
|
|
The
converter can be used for half duplex data communication between
PC RS232 serial to RS485 devices. CTS signal can be controlled
to change the direction of data flow.
|
Intelligent
Fire Alarm System
The Microcontroller based fire alarm system uses conventional
fire sensors. Its unique features include status log for
abnormal events like fire, open/short
circuit of wiring with
date & time stamping. Also it is possible to activate
emergency pump in case of fire. In addition, automatic voice
announcement can be triggered indicating zone and other informations.
|
